I was having a problem with the sink being pulled away from the wall so it was time to add some additional support.
I was having a problem with the sink being pulled away from the wall so it was time to add some addtioanl support.
When I arrived at the store I had a red light on both sides of the change machine. Sometimes this is a good thing but usually it’s because there is an error.
•Where to find Probate Leads without leaving your office.
On some of the older models a contact for the motor starter on the circuit board fails and the drum will not turn. The repair is easy enough if you have soldered or you could probably get a local computer repair shop to solder it for you.
I checked behind the dryer and heard the motor "humming ". At that point it seemed like a simple fix to remove the motor and have it checked and repaired.
One of the most common causes of noise in a dryer is a screw that drops through the holes of the drum and rubs against the housing.
Google, Bing and Yahoo are constantly updating their systems to provide relevant information based on user searches and even if you have been on the first page previously you may not be there now.
Most Laundromats use Natural Gas for dryers and water heaters. There are some that use propane and a few that use power but natural gas is the most popular.
In all of my stores I have a mail slot that drops into a secure area. I leave refund slips in a basket by the mail slot that the customer can fill out their Name, Address, Phone, Concern and amount requested.
I was doing some work on a Dexter Dryer so while I had it apart I wanted to show you some of the key parts that are behind the pulleys.